Get Niagara Cutter EXB350 Cobalt Steel End Mill, TiAlN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" with lowest price. high quality Product and top trusted online store in the USA, you are coming to the right place. It’s a excellent Product and we are absolutely recommend it!
Description :
The Niagara Cutter EXB350 TiAlN-coated cobalt steel ball nose end mill combines powdered-metal cobalt steel. The number of flutes varies; fewer flutes provide better chip-carrying capacity. Powdered-metal cobalt is high-speed steel (HSS) with 8. 5% cobalt, which provides better heat and wear resistance than high-speed steel. The TiAlN coating resists heat better than TiN and TiCN coatings. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum. ), The flutes' cutting edges are treated with extra grinding passes, minimizing surface roughness and creating a low-friction surface on the cutting edge to help prevent chips from sticking to the tool. The 35-degree helix angle provides more support behind the cutting edge than higher angles and increases cutting action and chip evacuation compared to the standard 30-degree helix. It efficiently cuts radiuses, slots, fillets. The tool has an eccentric primary relief feature that provides better support behind the cutting edge than a flat relief, reducing tooth breakage in deep cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The tools ball nose creates contoured surfaces where sharp corners are not required. Cutting diameter tolerance is +0. 001" to -0. 000". The tool has a Weldon shank. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries.Features :
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
- 35-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix.
No comments:
Post a Comment